* このファイルは、一般のお客様は対象外です。 補足説明:かならず最後までお読みください ========================================================================== (C) Copyright IBM Corp. 1999 ========================================================================== 【ソフト名】 IBM Aptiva Eシリーズ2165-0J4/0J5/1J4/1J5/2J4/5J4/5J7/5JT/6J4/6J7/6JT, 2190-0J5/1J5 BIOS,S/N,M/T TOOLS (出荷時のBIOS,修理部門専用) 【登 録 名】 BKBEN170.EXE 【著作権者】 日本アイ・ビー・エム株式会社 【対応機種】 IBM Aptiva Eシリーズ 2165-0J4/0J5/1J4/1J5/2J4/5J4/5J7/5JT/6J4/6J7/6JT 2190-0J5/1J5 【配布条件】 1)ダウンロードしたファイルの再配布は禁止します。 2)以下の禁止事項は守って下さい。 −他のネットワークへの転載。 −ダウンロードしたファイルおよび作成したファイルの改変。          −雑誌・市販製品へ許可なく添付する事。 【導入方法】この補足説明を、印刷、保存、メモをとる等して、導入方法を確認 してください。 ========================================================================== 【ドライバーのファイルの作成方法】 −はじめに−  この補足説明をよくお読みになった上で、「BKBEN170.EXE」をハードディスクの適当 なディレクトリにダウンロードしてください。  ダウンロードファイル名を『BKBEN170.EXE』として下さい。 −デバイスドライバーのファイルの作成手順− 1.DOSプロンプトを開きます。  [例] Windows95/98 の場合   「スタート」ボタンをクリックし、「プログラム」->「MS-DOSプロンプト」 2.ダウンロードしたファイルのあるディレクトリへ移動します。   [例] 「E」ドライブのディレクトリ「DOWNLOAD」にある場合   以下のようにキーボードで入力します   C:\WINDOWS>E: [Enter]   E:\>cd \DOWNLOAD [Enter] 3.以下のようにキーボードで入力し、ファイルを解凍します。 E:\DOWNLOAD>BKBEN170.EXE [Enter]   awdflash.exe, bkben17a.bin, vpd.exe, readme.txt の4つのファイルが作成 されます。 4.導入方法は下記の「使用方法」をお読みください。 ========================================================================== 【ファイル紹介】 IBM Aptiva Eシリーズ 2165-0J4/0J5/1J4/1J5/2J4/5J4/5J7/5JT/6J4/6J7/6JT, 2190-0J5/1J5 BIOS,S/N,M/T TOOLS (出荷時のBIOS,修理部門専用) ============ =========================== BIOS,S/N,M/Tを書き込むツールです。修理部門以外使用しないでください。 使用する文字は半角英数、大文字を使用します。 BIOS UPDATE; awdflash.exe,bkben17a.bin BIOS Level BKBEN17A BIOS Date 05/19/1999 S/N,M/T UPDATE; vpd.exe [対象機種] [対象機種] IBM Aptiva Eシリーズ Aptiva 10J (2165-0J4/0J5) Aptiva 11J (2165-1J4/1J5) Aptiva 12J (2165-2J4) Aptiva 15J (2165-5J4/5J7/5JT) Aptiva 16J (2165-6J4/6J7/6JT) Aptiva 20J (2190-0J5) Aptiva 21J (2190-1J5) [使用方法] NOTE: The flash update procedure does not change the model number and serial number information in BIOS. 1. Prepare a bootable DOS diskette with AWDFLASH.EXE and VXXYYZZ.BIN files NOTE: The AWDFLASH.EXE is flash utility programs. The VXXYYZZ.BIN is a BIOS source code binary file. 2. Insert the diskette and boot from drive A. WARNING: Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS …. 3. At the DOS prompt, type A:> AWDFLASH VXXYYZZ.BIN and then press Enter. 4. The screen shows: “Do You Want To Save Bios (Y/N)”. Type Y if you want to save old bios data, and N if you do not. 5. When the screen shows: “Are You Sure To Program (y/n)”, type Y to flash and update the system bios. 6. The program updates the BIOS automatically. 7. Wait for the update to complete. WARNING: Do not turn off the system power while the BIOS is programming, or the flash ROM will be destroyed. 8. Press F1 to Reset (or press F10 to exit) the system after the BIOS is completely updated. The model number and serial number information is stored in BIOS ROM and displayed in the “Model Information” of BIOS Setup main menu. If a repair is completed by replacing the system board or installing a new BIOS ROM, then you need to enter the original system’s model number and serial number in the new BIOS ROM. To enter the model number and serial number into BIOS: 1. Prepare a bootable DOS diskette with VPD.EXE files. 2. Insert the diskette and boot from drive A. WARNING: Do not boot with any memory related driver such as HIMEM.SYS, EMS.SYS …. 3. At the DOS prompt, type A:>VPD then press Enter. You will be asked if you want to update the serial number, type Y to continue. When the screen shows: Serial Number: Enter the serial number and press Enter to continue. You can type a maximum of 7 characters (without spaces). Follow the instructions on the screen to complete the procedure. 4. Type A:>VPD and press Enter to display and verify your input model number and serial number information. ========================================================================== ダウンロードファイル名を『BKBEN170.EXE』として下さい。