Help info for using this IBM 10/100 EtherJet PCI Adapters DHCP/RPL Option Utility diskette, ETPFLSH.EXE v2.50 v1.2 Follow the directions in the manual that accompanies the option kit, or the adapter manual, for installing the rom module on your adapter. Note that if you have the IBM 10/100 EtherJet PCI Adapter with Wake on LAN p/n 34L0201 or 08L2565, then it already has the rom module built on-board as a standard feature. This on-board rom is already pre-flashed with LSA2 code for dhcp pxe boot ready. INSTRUCTIONS: This flash diskette for the IBM 10/100 EtherJet PCI Adapters is a DOS bootable Flash diskette. To load, change, or update image in the flash module: 1) Place diskette in drive A: 2) Shutdown and reboot system 3) When prompted enter D for DHCP, R for RPL, E for Erase, C for Cancel Note: The PXE DHCP Flash code in this diskette is LSA2 version 99J. IF you currently have LSA1 code, or an older version of LSA2 code in your adapter boot rom, and want to upgrade to LSA2 version 99J, then just simply select 'D'. The program will then remove current code and load the new code. Note: IBM Lan Client Control Manager LCCM v2.x is now available. LCCM v2.x supports both RPL remote boot or DHCP PXE remote boot option with IBM 10/100 EtherJet PCI adapters. LCCM v2.x is a push technology for true remote client boot from LCCM servers. To complement remote boot function, IBM Wake on LAN technology offers true Wake-up event to a fully powered down PC system (unlike some other WoL technologies that can only restart a PC system from a suspend mode). Together with Wake on LAN + remote boot options from IBM 10/100 EtherJet PCI Adapters, LCCM v2.x will provide the most advanced, comprehensive, and flexible technology to date for campus or enterprise-wide remote client management. Now, with IBM LCCM v2.x, users can remotely turn on a PC system, then have it remotely boot up to a server, with the choice of either RPL boot or DHCP PXE boot. * Third-party trademarks are the property of their respective owners