Installation for Windows 2000 When the Conexant modem is inserted into a PCI slot of a PC running Windows 2000, upon bootup the inbuild drivers will automatically be installed. This will occur without user intervention. To maunally install the desired version of drivers, a driver update must be performed. To do this follow these instructions: A)Go to "Control Panel", double click "System". B)Select the "Hardware" tab, then click the "Device Manager" button. C)Click on the "+" next to "Modem", then double click on the Rockwell modem. D)Select the "Driver" tab, then click the "Update Driver" button. E)Click the "Next" button,then click "Search for Suitable drivers" and press "next". F)Select "Specify a Location", then click "next". G)Press the "Browse" button, then browse for the driver directory (please make note of this location as it is needed in step I) , then click the "Open" button. H)A screen will appear that states that several applicable drivers were found. Click the checkbox that says "Install one of the other drivers." Then press the "Next" button. I)A list of applicable drivers will appear that shows the location of the drivers. Highlight the driver whose path matches the path noted in step G. Then click "Next". J)At this point, the new drivers will be copied to the appropriate locations, click Next or Finish when prompted. Additional Notes for Silent Installation: To install the modem using the unattended installation, double-click on the W2KSETUP.EXE program, which will install the modem. Uninstallation instructions : Go to the Device Manager. Go to Modem Folders and Device properties section. Then go to the driver properties section. Click the uninstall option.