1/03/97 For reliable operation your Data and Fax software must be set for Hardware Flow Control. Please follow the instructions in the Installation Guide to install the software to be used with Windows95. After the setup program successfully installs the software drivers, you must reboot windows to activate the modem in order to use it. Please be careful when you install the modem on Windows95 The IBM HPC modem requires the right device driver when installed to your PC. Any of the device drivers included in the original Windows95 will not work with the modem. The diskette in the carton contains the right modem driver. Please follow the instructions in the Installation Guide to install the driver from the diskette. If you have already installed a wrong driver, please follow the steps below to remove the wrong driver from your system and follow the Users Guide to install the correct driver. 1. Insert the modem card. 2. Go to Windows95 Control Panel, click the System icon. 3. On the System Property windows, click the Device Manager tab. 4. Double click the Modem icon so that you can see the wrong modem driver icon. 5. Select the driver icon and remove it by clicking Remove button at the bottom of the windows. 6. Click OK to close the System Property windows. 7. Then, follow the instructions in the Installation Guide to install the correct driver from the diskette.