File V90PCI2K.EXE contains the driver files need to install the "IBM V.90 PCI Data/Fax Modem" in the Windows 2000 operating system environment.

1.	Download the file V90PCI2K.EXE to your system.
2.	From the system start menu select RUN, then enter the location of the file
	V90PCI2K.EXE. Then click OK to execute the file. The file is self extracting and will 		create all the file needed.

Installing the Drivers in Windows 2000
1. 	After installing the modem hardware, turn on your computer. After Windows
	2000 starts up, it will detect your modem and start the Found New
	Hardware Wizard. Click the Next button to continue.
2. 	At the next dialog box, make sure that "Search for the best driver for your
	device (Recommended)" is selected, then click Next.
3. 	Next the wizard will ask which drives or folders it should search for the
	drivers. Click to select the Floppy disk drive. A check mark will appear in
	the appropriate box. Make sure that all other options are deselected, clicking
	them to deselect, if necessary. Insert the modem's installation disk and
	click Next.
4. 	The wizard will find the driver on the disk and identify the modem as an
	"IBM V.90 PCI Data/Fax Modem" Click Next.
5. 	After Windows has finished copying the drivers to where they belong in
	your system, it will announce the end of the installation process. Click the
	Finish button.

For additional information on modem installation please see the modem installation guide.