Analog Devices Inc. SoundMAX(R) 3.0 Audio SoundMAX 3.0 is designed for and tested with Windows(R) 98SE, Windows 2000, Windows Millennium and Windows XP. INSTALLATION AND REMOVAL INSTRUCTIONS: Installation or Update of Analog Devices SoundMAX 3.0 Audio Driver NOTE: Remove any previously installed driver using the instructions in the next section. 1. From the task bar, click on Start -> Run. 2. In the Run dialog box, type X:\path\setup, where X:\path is the full path to the root of the installation media. 3. When upgrading or reinstalling, a dialog will appear. Select Reinstall and press Next. 4. Click on the OK button or press the ENTER key. 5. Click on the Next and OK prompts as they appear. 6. Reboot the system to complete the installation. Removal of Analog Devices SoundMAX Audio Driver 1. From the task bar, click on Start -> Settings -> Control Panel. 2. Double-click on the Add/Remove programs icon. 3. Double-click on SoundMAX Install. 4. If the installation media is present, a Dialog will appear. Select Remove and press Next. 5. Reboot the system to fully uninstall the drivers. UNATTENDED (SILENT) INSTALLATION INSTRUCTIONS: Unattended installations use an InstallShield Silent Response File (setup.iss) to provide user input. Running an Unattended Installation Run SETUP.EXE as described in the installation section above, but with the -s parameter to use the .iss file that is provided with the driver. To use a different setup.iss file, use the -f1 parameter to provide the full path to the file. NOTE: When running an installation in silent mode, no messages are displayed. Instead, a log file named Setup.log captures installation information, including whether the installation was successful. The -f2 parameter can be used to control where the log file is created. Creating a Custom Silent Response File Run Setup.exe as directed above, but with the -r parameter to record the install responses in setup.iss. Use the -f1 parameter to control where the .iss file is created. The line below creates setup.iss in the c:\tmp directory. SETUP.EXE -r -f1c:\tmp\setup.iss HARDWARE AND SOFTWARE DEPENDENCIES: This software has been designed for and tested with Windows(R) 98SE, Windows 2000, Windows ME and Windows XP. There are issues with Windows 98 Gold that will cause problems. 1. The system must contain either an ICH chip set or a VIA Super South Bridge chip set. 2. One of the following operating systems must be installed on the system: Windows 98SE 4.10.2222A Windows ME 4.90.3000 Windows 2000 with Service Pack 1 (SP1) Windows XP 5.1.2600 Note: Microsoft has also released "Compatibility Updates" for Windows 2000 that address problems with specific applications. For a list of affected applications, visit: http://www.microsoft.com/windows2000/downloads/deployment/ appcompat/default.asp *********************************************************************** This driver is built for the Microsoft(R) Windows Operating Systems. Copyright 2001 Analog Devices, Inc. All names mentioned herein are a registered trademark or a trademark of Analog Devices or its respective owners. All rights reserved. *********************************************************************** Document Rev. 1.02