IBM FIRE GL4 Video Adapter FLASH Utility -Ver. 1.24.3 08/28/2001 (Contains video BIOS V1.24) Contains fix for CMVC defect 167155. This FLASH can only be used on production level Fire GL4 boards. To use this FLASH update utility on the IBM Fire GL4 video adapter, follow the directions below: 1. Place the diskette in drive A and boot from it. Note, make sure the diskette is not write-protected. NOTE: Your system must be set to boot to floppy first. 2. Turn your system on. 3. Follow the on-screen instructions until the update is complete. 4. Reboot the system with either Ctrl+Alt+Del or by powering off, then back on. NOTE: Do not attempt to run this FLASH utlity from a DOS prompt under either Windows 9x, NT or Windows 2000. It will not work. PRESS ANY KEY TO PROCEED WITH THE FLASH UPDATE.