Matrox G400 Video Adapter FLASH Utility -Ver. 16A.25.8 5/11/00 Fixes: Latest video BIOS (V1.6A IBM B25). Fixes defect #143335. This FLASH update must only be used on the Matrox Millennium G400 video adapter. To use this FLASH update utility on the Matrox G400 video adapter, follow the directions below: 1. Place the diskette in drive A and boot from it. Note, make sure the diskette is not write-protected. NOTE: Your system must be set to boot to floppy first. 2. Turn your system on. 3. Follow the on-screen instructions until the update is complete. 4. Reboot the system with either Ctrl+Alt+Del or by powering off, then back on. NOTE: Do not attempt to run this FLASH utlity from a DOS prompt under either Windows 95 or NT. It will not work. PRESS ANY KEY TO PROCEED WITH THE FLASH UPDATE.