=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Adaptec EZ-SCSI Lite 4.00e README (c) Copyright Adaptec, Inc. 1995-1996 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Welcome to Adaptec EZ-SCSI Lite 4.0 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= This README file explains how to install Adaptec EZ-SCSI Lite 4.0. The installation process copies a larger README.TXT file onto your hard drive which explains Adaptec EZ-SCSI in greater detail. If your questions are not asnwered in this file please refer to the README.TXT file on your hard drive after installation. =-=-=-=-=-=-=-= GETTING STARTED =-=-=-=-=-=-=-= Follow these steps to get you up and running as quickly as possible: 1.) If running Windows 95, or Windows 3.1/3.11, insert Disk 1 into your floppy drive and run SETUP.EXE. Follow the instructions. 2.) If running DOS, insert Disk 1 into your floppy drive, change to your floppy's drive letter, and run INSTALL.BAT. For example: C:\> A: A:\> INSTALL Follow the instructions.