IBM ThinkPad X30 August 2, 2004 ThinkPad BIOS Update Utility Version 1.07 (1KET46WW) ====================================================================== Notice: ------- - This BIOS version will only work with Embedded Controller Program Version 1.03 (or higher). Obtain an additional package, Embedded Controller Program Version 1.00 (or higher), and update the Embedded Controller Program in the system with it if necessary. - If you should update the Embedded Controller Program as well as the BIOS, update the Embedded Controller Program first. - This program is language independent and can be used with any language system. What This Package Does ---------------------- This ThinkPad BIOS Update Utility updates the BIOS (system program) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following system: - ThinkPad X30 The supported operating systems are as follows: - Windows 98 - Windows 98 Second Edition(*1) - Windows NT 4.0 with Service Pack 6 or later - Windows 2000 - Windows XP (Home Edition and Professional) (Note) *1: Before using the ThinkPad BIOS Update Utility with Windows 98 Second Edition, IBM recommends that you apply the Windows 98 Second Edition Shutdown Supplement from the Microsoft Web Site Knowledge Base Article ID Q239887. To determine if you should update the BIOS, refer to the Summary of Changes section. To update the BIOS, refer to the Updating BIOS section. Released Versions ----------------- Where: BIOS version (BIOS internal ID) 1.00c (1KET39WW) Initial Release for ThinkPad X30 1.01 (1KET40WW) Problem fixes 1.02 (1KET41WW) Problem fixes 1.03 (1KET42WW) Problem fixes 1.04 (1KET43WW) Problem fixes 1.05 (1KET44WW) Problem fixes 1.07 (1KET46WW) Problem fixes Summary of Changes ------------------ Where: x.xx : BIOS version bbbbbbbb : BIOS internal ID which is for administrator purpose. (New) New Function or Enhancement (Fix) Correction to existing function <1.00c (1KET39WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 (or higher). - (New) Support for ThinkPad X30. <1.01 (1KET40WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 (or higher). - (Fix) (Windows 98 and Windows NT 4.0) A resume password prompt is overridden by the Windows Desktop when the system goes into suspend mode and then resumes normal operation by timer or incoming call. - (Fix) (Windows 98) A resume password prompt on the external display screen is corrupted when the system resumes normal operation from standby mode. <1.02 - 1.02 (1KET41WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 (or higher). - (Fix) (Windows XP, Windows 2000, Windows NT 4.0 and Windows 98) After the system resumed normal operation from standby mode with the LCD panel closed, the LCD has blank screen when the LCD panel is opened. - (Fix) The boot order of 'Network' device in Startup menu of IBM BIOS Setup Utility becomes last after BIOS update. - (Fix) (DOS) Usable memory size for DOS program becomes smaller about 40 KB when the system is booted with a USB CD-ROM drive. - (Fix) (DOS) Read and write performance of USB diskette drive will go slow when a DOS memory manager like as EMM386 is installed. <1.03 - 1.03 (1KET42WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 (or higher). - (New) Enhancement on password security function. - (Fix) (Windows XP and Windows 2000) If the system resumes normal operation from suspend mode by starting a program with Scheduled Tasks utility, the system may set wrong date and time. - (Fix) (Windows 2000 and Windows 98) Disablement of SpeedStep function does not work correctly. - (Fix) (DOS) A keyboard state sticks to "SysRq" key pressed. Some Alt key combinations will be ignored. - (Fix) (Windows XP and Windows 2000) If beeps for "Lid close action" is enabled, beeps may sound continuously if the LCD panel is closed while Windows is booted up. <1.04 - 1.04 (1KET43WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 (or higher). - (New) Enhancement on password security function. - (New) Compatibility enhancement with SMBIOS access programs. - (New) Function to disable the option ROM of internal Ethernet adapter card, in order to expand usable memory area by DOS. (This can be done by disabling the Internal Network Option ROM option under Config and Network in IBM BIOS Setup Utility.) - (Fix) (Windows 98) Resume error message may be displayed when the system resumes normal operation from hibernation mode if a USB memory key device is hot-attached/detached to/from the system. - (Fix) (Windows 2000 and Windows XP) The battery remaining percent (hour) becomes shorter than expected in hibernation mode when the AC adapter is detached. - (Fix) (Windows 2000 and Windows XP) The LCD screen may blink twice when the LCD is closed then opened. <1.05 (1KET44WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.00 or 1.02. - (Fix) (Windows XP) Some multi-function CardBus cards may not work after resuming normal operation from standby mode. - (Fix) The boot order of the network devices under Startup and Network in the IBM BIOS Setup Utility changes from default if the F9 key to load default configuration is pressed twice. - (Fix) (Windows XP and Windows 2000) If the computer is attached to an UltraBase X3 or Docking Station and the second hard disk drive with a hard disk password is hot- attached while the system is running, a hard disk password prompt for the second hard disk does not appear after the system is restarted. - (Fix) (Windows XP and Windows 2000) If the LCD panel is closed immediately after Fn + F12 keys are pressed to go into hibernation mode, the LCD screen may remain turned off after the LCD panel is opened. - (Fix) The system may hang during system boot or may not be booted from the USB diskette drive if both a USB mouse and a USB diskette drive are attached to the computer. <1.07 (1KET46WW)> NOTE: This BIOS version will only work with Embedded Controller Program Version 1.03 or higher. - (Fix) (Windows XP and Windows 2000) The system may resume normal operation from standby mode when the LCD panel is opened even though "Do nothing" for When the LCD is closed is selected in the Power Options. - (Fix) (Windows XP) The system may not resume normal operation from standby mode when all of the following conditions are met: - The computer is attached to a Docking Station with a network PC Card inserted and is connected to the network. - In the power management properties of the network PC Card, "Allow this device to bring the computer out of standby" option is enabled, and the computer is configured to resume normal operation from standby mode through the network. Note: You can enable this feature by going to the Power Management properties of your network PC Card device under Network Adapter device in the Device Manger, and checking "Allow this device to bring the computer out of standby" option. Updating BIOS ------------- Notes: - Remove the Power-on password prior to updating the BIOS in RDM (Remote Deployment Manager) environment or similar environment. - You need an AC adapter and a charged battery pack to update the BIOS. - If your computer is attached to any kind of port replicator, turn off the computer and detach it before proceeding. - If a USB Diskette Drive is attached to your computer, turn off the computer and detach it before proceeding. - Before using this BIOS Update Utility with Windows 98 Second Edition, IBM recommends applying the Windows 98 Second Edition Shutdown Supplement from the Microsoft Web site Knowledge Base Article ID Q239887. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Start Windows 98 or start Windows NT 4.0/2000/XP and logon with administrative privileges on the target computer. 4. Extract this package onto the hard disk drive. 5. Click the Start button and then click Run. 6. Specify the file name with the full path name where you extracted the package (e.g. C:\Temp\1KUJ05US.EXE) and then click OK. Hint: For unattended update, specify the file name with options "-s -a -s". (e.g. C:\Temp\1KUJ05US.EXE -s -a -s) The BIOS is updated without any user interaction. 7. Follow the instructions on the screen. Depending on the operating system configuration, restarting the operating system and rerunning this BIOS update utility may be required. In this case, the following message will appear. "DeviceIoControl() returns 2 Please restart your operating system and execute the BIOS or Embedded Controller update utility again." Windows shutting down automatically and ThinkPad BIOS Update Utility screen appears. 8. Select Read this first from the menu and carefully read the information that appears. 9. Press the Esc key to return to the menu. 10. Select Update system program and follow the instruction on the screen. Attention: Do not turn off or suspend the computer until the update has been completed. If you turn off or suspend the computer while the update is still in progress, the system board may have to be replaced. After the update has been completed, the system is automatically turned off. Initializing BIOS ----------------- In some cases, it may be a good idea to try BIOS initialization when you have some troubles. To initialize the BIOS settings, 1. Turn off the computer. 2. Turn on the computer. 3. While the Press F1 for IBM BIOS Setup Utility message is displayed at the lower-left area of the screen, press F1 key. The IBM BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Press F9 key to load default configuration. 5. Select Yes. 6. Press F10 key to save default configuration and exit. 7. Select Yes. After the initialization has been completed, the system restarts automatically. Determining which version is installed ---------------- Each version of the ThinkPad BIOS Update Utility contains the following BIOS. Also the supported versions of Embedded Controller Program are shown below. The versions of BIOS and Embedded Controller Program can be viewed by entering IBM BIOS Setup Utility. BIOS Version Embedded Controller (Internal ID) Program Version ---------------- ---------------------- 1.00c (1KET39WW) 1.00, 1.02 (or higher) 1.01 (1KET40WW) 1.00, 1.02 (or higher) 1.02 (1KET41WW) 1.00, 1.02 (or higher) 1.03 (1KET42WW) 1.00, 1.02 (or higher) 1.04 (1KET43WW) 1.00, 1.02 (or higher) 1.05 (1KET44WW) 1.00 or 1.02 1.07 (1KET46WW) 1.03 or higher To enter the IBM BIOS Setup Utility; 1. Turn off the computer. 2. Turn on the computer. 3. While the Press F1 for IBM BIOS Setup Utility message is displayed at the lower-left area of the screen, press the F1 key. The IBM BIOS Setup Utility menu will be displayed. If a password prompt appears, type the correct password. 4. Check BIOS Version and Embedded Controller Version. 5. Turn off the computer. Memory Map Information ---------------------- Reserved Area: The following conventional memory addresses are reserved by BIOS and others. C0000-CFFFF : Reserved for Video BIOS D0000-D3FFF : Reserved for Option ROM of Ethernet (*2) DC000-DFFFF : Reserved for USB BIOS (*3) E0000-FFFFF : Reserved for System BIOS Note: *2: This area becomes free by disabling the Internal Network Option ROM option under Config and Network in IBM BIOS Setup Utility. But, if disabled, both Wake-on-LAN and PXE boot functions do not work. *3: This area becomes free by disabling the USB BIOS Support option under Config and USB in IBM BIOS Setup Utility. Even if disabled, the USB devices work under the Windows environment. Usable Area: The following memory address can be used by the memory manager such as EMM386. D4000-DBFFF But certain addresses in this area will be reserved for CardBus Controllers or others by Operating Systems. The addresses vary and depend on the design of each Operating System. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Intel is a registered trademark of Intel Corporation. * SpeedStep is a trademark of Intel Corporation. * Microsoft, Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.