---------------------------------------------------------------------- Software Name Intel Matrix Storage Manager Driver Supported models ThinkPad R60, R60e ThinkPad T60, T60p ThinkPad X60, X60s, X60 Tablet ThinkPad Z61e, Z61m, Z61p, Z61t Operating Systems Windows XP (Home Edition and Professional) Windows XP Tablet PC Edition 2005 Windows 2000 Version 5.5.2.1003 Issue date September 21, 2006 Supported devices Intel 82801GBM SATA AHCI Controller ---------------------------------------------------------------------- What This Package Does This package installs the Storage driver to enable the following SATA Storage Controller on the system board. Device name in the Device Manager -------------------------------------- Intel(R) 82801GBM SATA AHCI Controller To determine if you should update the Storage driver, refer to the "Summary of Changes" section. To update the Storage driver, refer to the "Installation Instructions" section. This program is language independent and can be used with any language system. ---------------------------------------------------------------------- Released Versions Version 5.5.2.1003 2nd. release Version 5.5.0.1035 Initial release ---------------------------------------------------------------------- Summary of Changes Key: < > Version (New) New function or enhancement (Fix) Correction to existing function <5.5.2.1003> - (New) Support for ThinkPad X60 Tablet <5.5.0.1035> - (New) (Initial release) Support for ThinkPad T60,T60p,X60,X60s Support for ThinkPad R60,R60e,Z61e,Z61m,Z61t Support for ThinkPad Z61p ---------------------------------------------------------------------- Installation Instructions Note: Software Installer provides update wizard for this package. [Windows XP] CLEAN INSTALL: Before installing the operating system, install Intel(R) Matrix Storage Manager Driver, as follows: Note: Be sure to install Intel Matrix Storage Manager Driver before installing the operating system. Otherwise your computer will not respond; it will only display a blue screen. 1. Attach a diskette drive to your computer. 2. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM and copy the driver to a diskette. 3. To make sure that SATA AHCI is enabled, start the BIOS Setup Utility menu. 4. Select Config. 5. Select Serial ATA (SATA). 6. Select AHCI. 7. Change the startup sequence of your computer. Following the instructions on the Startup menu in the BIOS Setup Utility, set the CD-ROM drive to start first. 8. Insert the CD for Windows XP into the CD or DVD drive, and restart the computer. 9. To install a third-party SCSI or RAID driver first, press F6. 10. When prompted, select S for Specify Additional Device. 11. When prompted, insert the diskette that you created in step 2, and press Enter. 12. Select Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M), and press Enter. 13. To continue the installation, press Enter again. Leave the diskette in the drive until the next reboot; the software may need to be copied from the diskette again when the files are copied during setup. 14. Follow the instruction to complete the OS installation. If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure: Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility before installing Intel Matrix Storage Manager Driver, your computer will not respond; it will only display a blue screen. 1. Start the BIOS Setup Utility menu. 2. Select Config. 3. Select Serial ATA (SATA). 4. Select Compatibility. 5. Install Windows XP and Service Pack 2. 6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM. 7. Run Intel Matrix Storage Manager Driver. To do this, go to C:\DRIVERS\WIN\IMSM\PREPARE, and double-click install.cmd. 8. Turn the computer off and then on again. 9. Start the BIOS Setup Utility menu. 10. Select Config. 11. Select Serial ATA (SATA). 12. Select AHCI. 13. Start Windows XP. The Welcome to the Found New Hardware Wizard appears. 14. Click No, not this time, and then click Next. 15. Select Install from a list or specific location (Advanced), and then click Next. 16. Select Search for the best driver in these locations. Then select Include this location in the search:, specify the path, C:\DRIVERS\WIN\IMSM, and click Next. The Completing the Found New Hardware Wizard appears. 17. Click Finish. 18. When the System Settings Change window appears, click Yes. The computer restarts. UPDATE INSTALL: To update the driver, follow the instructions below: 1. Start Windows XP. 2. Click Start and Control Panel. 3. Click Performance and Maintenance and System. 4. Click Hardware tab. 5. Click Device Manager button. 6. Click the + mark to expand IDE ATA/ATAPI controllers 7. Right-click Intel(R) 82801GBM SATA AHCI Controller and click Properties. 8. Click Driver tab. 9. Click Update Driver button. 10. Select No, not this time and click Next. 11. Select Install from a list or specific location. 12. Click Next button. 13. Select Search for the best driver in these locations and Include this location in the search. 14. Click Browse button. 15. Locate the driver folder and click OK button. 16. Click Next button. The driver installation starts. 17. Click Finish button when the installation completes. 18. Click Close button. [Windows 2000] CLEAN INSTALL: Before installing the operating system, install Intel(R) Matrix Storage Manager Driver, as follows: Note: Be sure to install Intel Matrix Storage Manager Driver before installing the operating system. Otherwise your computer will not respond; it will only display a blue screen. 1. Attach a diskette drive to your computer. 2. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM and copy the driver to a diskette. 3. To make sure that SATA AHCI is enabled, start the BIOS Setup Utility menu. 4. Select Config. 5. Select Serial ATA (SATA). 6. Select AHCI. 7. Change the startup sequence of your computer. Following the instructions on the Startup menu in the BIOS Setup Utility, set the CD-ROM drive to start first. 8. Insert the CD for Windows 2000 into the CD or DVD drive, and restart the computer. 9. To install a third-party SCSI or RAID driver first, press F6. 10. When prompted, select S for Specify Additional Device. 11. When prompted, insert the diskette that you created in step 2, and press Enter. 12. Select Intel(R) 82801 GBM SATA AHCI Controller (Mobile ICH7M), and press Enter. 13. To continue the installation, press Enter again. Leave the diskette in the drive until the next reboot; the software may need to be copied from the diskette again when the files are copied during setup. 14. Follow the instruction to complete the OS installation. If you do not have a diskette drive, you can install Intel Matrix Storage Manager Driver by the following alternative procedure: Note: If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility before installing Intel Matrix Storage Manager Driver, your computer will not respond; it will only display a blue screen. 1. Start the BIOS Setup Utility menu. 2. Select Config. 3. Select Serial ATA (SATA). 4. Select Compatibility. 5. Install Windows 2000 and Service Pack 4. 6. Download Intel Matrix Storage Manager Driver from the Web site and extract the driver to C:\DRIVERS\WIN\IMSM. 7. Run Intel Matrix Storage Manager Driver. To do this, go to C:\DRIVERS\WIN\IMSM\PREPARE, and double-click install.cmd. 8. Turn the computer off and then on again. 9. Start the BIOS Setup Utility menu. 10. Select Config. 11. Select Serial ATA (SATA). 12. Select AHCI. 13. Start Windows 2000. The Welcome to the Found New Hardware Wizard appears. 14. Click Next. 15. Select Search for a suitable driver for my device (recommended), and then click Next. 16. Select Specify a location, and then click Next. 17. Specify the path, C:\DRIVERS\WIN\IMSM, and click OK. The Driver Files Search Results window appears. 18. Click Next. The Completing the Found New Hardware Wizard appears. 19. Click Finish. 20. When the System Settings Change window appears, click Yes. The computer restarts. UPDATE INSTALL: To update the driver, follow the instructions below: 1. Start Windows 2000. 2. Click Start, select Settings, and click Control Panel. 3. Double-click System. 4. Click Hardware tab. 5. Click Device Manager button. 6. Click the + mark to expand IDE ATA/ATAPI controllers. 7. Right-click Intel(R) 82801GBM SATA AHCI Controller and click Properties. 8. Click Driver tab. 9. Click Update Driver button. 10. Click Next button in Upgrade Device Driver Wizard dialog box. 11. Select Search for a suitable driver for my device. 12. Click Next button. 13. Select Specify a location only in Optional search locations. 14. Click Next button. 15. Click Browse button. 16. Locate the driver and click OK button. 17. Click Next button. The driver installation starts. 19. Click Finish button when the installation completes. 20. Click Close button. ---------------------------------------------------------------------- Determining which version is installed To check the version of the device driver that is installed on your system, follow the following instructions: Windows 2000/XP: 1. Right-click the My Computer and click Properties. 2. Click Hardware tab and click Device Manager button. 3. Click the + sign in front of the IDE ATA/ATAPI controllers category. 4. Double-click Intel(R) 82801GBM SATA AHCI Controller. 5. Click Driver tab and the driver version is displayed. ---------------------------------------------------------------------- Trademarks * ThinkPad is a registered trademark of Lenovo. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.