IBM ThinkPad                                        October  30, 2000
Audio Features for Windows 95/98

Version 2.88
======================================================================

What This Package Does
-----------------------
The Audio Features enables or updates the audio function
of the following ThinkPad computers:

   - ThinkPad 770X, 770Z
   - ThinkPad 600E


Released Version
----------------
Version 2.83   Initial release
Version 2.86   Support for new model
Version 2.88   A problem fix 


Summary of Changes
------------------
Where: <n.nn>  Package version (for example, 1.00 means Version 1.00)
       (New)   New function or enhancement
       (Fix)   Correction to existing function

<2.83>
 - (New) Support for ThinkPad 770X, and 600E.

<2.86>
 - (New) Support for ThinkPad 770Z
 - (Fix) Hot doc fail if PCI audio is enabled
 - (Fix) Tone sound noise as connected to Modem
 - (Fix) Dial tone sounds in a shirill

<2.88>
 - (Fix) System time delays 2 seconds after suspend/resume

Installation Instructions
-------------------------
  1. Start Windows 95/98.
  2. Extract the Audio Features for Windows 95/98 into hard disk drive.
  3. Click Start.
  4. Click Run.
  5. Specify the installation program SETUP.EXE with full path you extracted 
     in the step 2 and click OK.
  6. Click the Uninstall Crystal Driver button at the pop-up window,
     and then select Shut Down. Re-start Windows 98.
  7. When Windows 98 detects Unknown Device, select
     Next button.  It will default to Search for best driver for your
     device, press the Next button.  This window should have search
     Specify a location checked and specify path name in the step 2, 
	 press the Next button.

     It will then identify the device as a Crystal PnP Audio System CODEC
     with the location of the driver set to CWDAUDIO.INF, press the Next
     button. It will begin copying files.  When coping completes, press the
     Finish button.

  8. Windows 98 will now detect the PCI Multimedia Audio device.  Push the
     Next button.  It will default to Search for best driver for your
     device, press the Next button. This window should have search Specify
     a location checked and specify path name in the step 2, press the Next button. 
	 It will then identify the device as a Crystal SoundFusion(tm) PCI Audio 
	 Accelerator with the location of the driver set to CWCAUDIO.INF,
	 press the Next button.

     When copying completes, press the Finish button.


Note: After the installation, you should find the following drivers installed
      under Sound, Video, and game controllers in Device Manager:

       Crystal PnP Audio System CODEC
       Crystal PnP Audio System Control Registers
       Crystal PnP Audio System Joystick
       Crystal PnP Audio System MPU-401 Compatible
       Crystal SoundFusion(tm) PCI Audio Accelerator
       Crystal SoundFusion(tm) Virtual MPU-401

Trademarks
----------
  * IBM and ThinkPad are trademarks of IBM Corporation.
  * Windows is a trademark of Microsoft Corporation.

Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.