IBM ThinkPad                                               June 25, 2001
CE Utility Diskette

Version 1.04
========================================================================

What This Diskette Does
-----------------------
This CE Utility Diskette enables you to set some function of the
following ThinkPad computers:

   - ThinkPad i Series 1200(1161-43U)
   - ThinkPad i Series 1300(1171-9MU/8MU/9NU/6MU/6NU/4MU/
                            9XU/8XU/9ZU/5XU/5CU/5ZU/6XU)


Released Version
----------------
Version 1.04     Initial release


Summary of Change
-----------------
 Key: <n.nn>  Diskette Version (for example, 1.00 means Version 1.00)
      (New)   New Function or Enhancement
      (Fix)   Correction to existing function

<1.04>
 - (New) Support for ThinkPad i Series 1200(1161-43U)
                     ThinkPad i Series 1300(1171-9MU/8MU/9NU/6MU/6NU/
                                       4MU/9XU/8XU/9ZU/5XU/5CU/5ZU/6XU)

Installation Guide
------------------
Power on the computer with this diskette in the diskette drive.  After
the systems starts up, the following message should appear:

      1. LCD Panel ID Utility
      2. Themal Senser Utility
      3. VPD Utility
      4. UUID Data Utility
      5. License Message
      6. Quit

You can only test a single item at a time.  Once that item has been
tested, you must restart the computer to test another item.

------------------------------------------------------------------------
Implementation Limitation:
- Diskette can not be write protected.


NOTE:  How to Input data for VPD Utility
 1. Build ID(only 5th to 6th byte)
    First you need to get the BIOS version No.
     1-1. Power on the system.
     1-2. When the message Press F1 for IBM BIOS setup Utility appears
          at the bottom left hand corner, press the F1 key.
     1-3. Wait for BIOS Utility screen appears.
     1-4. Select System Information.
     1-5. BIOS version is displayed at System BIOS Version line.
     1-6. Refer to the System Program Information section in the BIOS
          readme file to get the BIOS Build ID which corresponds to the
          BIOS version.
     1-7. Enter the 5th to 6th digit for the build ID.

     e.g.
     If the BIOS Build ID is 17UF26WW, just enter two digit ID No.
     as following: 26

  2. Box Serial Number(14 bytes)
     e.g.
     If the barcode label at the bottom of notebook shows
     TYPE 1161-210  S/N AA-D9PYR, just enter as below;

     1161210AAD9PYR

     You don't need to enter TYPE, S/N, dashes, or spaces

  3. Plannar Serial Number(17 bytes)
     If the barcode label under the memory module says like

     ----------------------
      11S5543C01041AADBVYL

      IBM FRU P/N: 12H2153
     ----------------------

     enter as below;

     12H2153041AADBVY1

     where 12H2153 comes from IBM FRU P/N and 041AADBVYL comes
     from last 10 digit of first line.


Trademarks
----------
  * IBM and ThinkPad are registered trademarks of IBM Corporation.
  * Windows is a registered trademark of Microsoft Corporation.

  Other company, product, and service names may be registered
  trademarks, trademarks or service marks of others.