***************************************************************************** * IBM ThinkPad March 8, 2005 * * Intel Chipset Support I for Windows 98/2000/XP * * Version 3.20.1008 * ***************************************************************************** Notice: ------- - If you use the Product Recovery function shipped with your ThinkPad to restore the Windows preload environment, you do not need this package. This package is required when you install Windows Operating Systems without the Product Recovery function. - This program is based on the US version but, this is language independent and can be used with any language system. What This Package Does ---------------------- This package contains following support modules. - To detect and configure the INTEL 830 chipset and 845 chipset. The following ThinkPad computers are supported: - ThinkPad T30 - ThinkPad X30 To determine if you should update the supplement files, refer to the "Summary of Changes" section. To update the supplement files, refer to the "Installation Guide" section. Released Versions ----------------- Version 1.00 Initial release Version 3.20.1008 No update, but change of only the version notation Summary of Changes ------------------ Where: < > Version (New) New function or enhancement (Fix) Correction to existing function <1.00> - (New) Detect and Configure INTEL 830/845 Chipset. <3.20.1008> - No update from version 1.00. Only the version notation was changed from 1.00 to 3.20.1008, in order to unite with the version notation of Intel. File versions ------------- Version 3.20.1008 --------------- ---------------- infinst_enu.exe 11/09/2001 09:51 Installation Guide ------------------ Following is the matrix to be applicable to each modules to the each OS. 98 98SE 2000 XP -------- -------- ------ ------ Component APM ACPI APM ACPI ACPI ACPI ------------------ -------- -------- ------ ------ INFINST_ENU.exe O O O O O *1 O means the applicable systems. *1 Applicable for ThinkPad T30 models written above. ---------------------------------------------------------------------- [INFINST_ENU.exe] Apply this program to enumerate INTEL 830 chipset and 845 chipset correctly after installing base operating system with each supplement files. Install: 1. Close any running applications. 2. Run the InstallShield* installation program in INTELINF folder. INFINST_enu.EXE 3. You will be prompted to agree to the license agreement. If you do not agree, the Installer will exit before extracting any files. 4. Follow the on-screen instructions and use the default settings to complete the setup, once the operating system has rebooted. 5. This completes the installation of the Intel(R) Chipset Software Installation Utility. Unattended installation: - Run infinst_enu.exe with switch "-a" and "-S" shown below. infinst_enu.exe -a -S How to extract Windows INF files prior to OS installation: 1. Click Start, then click Run. 2. Type infinst_enu.exe -a -a -p C:\INTEL (for example ) in Open column. 3. Click [OK]. 4. Setup Screen (INTEL Chipset Software Installation Utility V3.20.1008) appears. NOTE: This stage just runs the installShield program and does not extract the INF and CAT files. 5. Click [Next] in "Welcome to the InstallShield Wizard for". 6. Click [Yes] to Accept License Agreement. 7. Click [Next] at ReadMe Information screen. 8. Progress bar shows the extract status. After reaching 100%, the INF and CAT files have been extracted in C:\INTEL folder. 9. Check C:\INTEL folder. 10. You can see "ICH3-M" folder and others in C:\INTEL directory. 11. You can use the INF and CAT files from the Win2000, Win98, Win98SE, XP folders for installation. 12. The subdirectory that you want to use is C:\INTEL\ICH3-M\. [Windows 2000] 1. Create the following directory structure under the \$OEM$\$1\drivers\IntelINF. 2. Copy all of the files from C:\INTEL\ICH3-M\Win2000 to the directory created in step 1. 3. Either modify the default Windows 2000 installation answer file, UNATTEND.TXT, located in , or create a customized answer file. The answer file must include the following information. [Unattended] OemPreinstall = Yes OemPnPDriversPath = "drivers\IntelINF" 4. Run "WINNT.EXE /u: /s:" to install Windows 2000. [Windows 98/98SE] 1. Copy the Windows 98 INF Files from the C:\INTEL\ICH3-M\Win98 to the setup directory that has Windows 98 Supplement Files for Windows 98 installation. or Copy the Windows 98 Second Edition INF Files from C:\INTEL\ICH3-M\Win98SE to the setup directory that has Windows 98 Supplement Files for Windows 98 Second Edition installation. 2. Depending on your content, there are two cases: Case A: CUSTOM.INF file is NOT present in the In this case, rename INFPRELO.INF to CUSTOM.INF. Case B: CUSTOM.INF is present in the In this case, incorporate the content of INFPRELO.INF into the existing CUSTOM.INF file. 3. Run SETUP.EXE to install Windows 98. Trademarks ---------- * IBM and ThinkPad are registered trademarks of IBM Corporation. * Intel is a registered trademark of Intel Corporation. * Microsoft and Windows are registered trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.