IBM ThinkPad T40/T40p March 12, 2003 Embedded Controller Program Service Diskette Diskette Version : 1.02 Embedded Controller Version : 1.02 (1RHT15WW) ====================================================================== Notice: ------- This program is language independent and can be used with any language system. What This Diskette Does ----------------------- This Embedded Controller Program Service Diskette updates the embedded controller program (H8 controller firmware) stored in the ThinkPad system to fix problems, add new functions, or expand functions as noted below. This release supports the following system: - ThinkPad T40/T40p To determine if you have to update the embedded controller program, refer to the Summary of Changes section. To update the embedded controller program, refer to the Installation instructions section. Released Versions Descriptions ----------------------- ------------------------------------------ Version 1.00 (1RHT13WW) Initial Release Version 1.02 (1RHT15WW) Fix for a problem Summary of Changes ------------------ Key: Diskette Version (for example, 1.00 means Version 1.00) (New) New Function or Enhancement (Fix) Correction to existing function <1.00 - 1RHT13WW> - (New) Support for ThinkPad T40/T40p. <1.02 - 1RHT15WW> - (Fix) Fix reboot problem to change battery source to second battery when system enters Suspend. Installation instructions ------------------------- NOTES: - You need an AC adapter and a charged battery pack to update the embedded controller program. - If your computer is attached to any kind of docking station or port replicator, turn off the computer and detach it before proceeding. 1. Print these instructions or display on another computer. 2. Firmly connect the AC adapter to the computer. 3. Insert the write protected Embedded Controller Program Service Diskette into the diskette drive and turn on the computer. 4. Select Read this first from the menu and carefully read the information that appears. 5. Press the Esc key to return to the menu. 6. Select Update Embedded Controller program and follow the instruction on the screen. Warning: Do not turn off or suspend the computer until the update has been completed. IF YOU TURN OFF OR SUSPEND THE COMPUTER WHILE THE UPDATE IS STILL IN PROGRESS, THE SYSTEM BOARD MAY HAVE TO BE REPLACED. After the update has been completed, do the following to make the changes effective. 7. Make sure there is no diskette in the diskette drive, then turn on the computer. 8. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left of the screen, press the Access IBM button. 9. Select Start setup utility. If you have set a superviser password, the IBM BIOS Setup Utility menu appears after you type in the password. 10. Verify the Embedded Controller Version. Embedded Controller Program Information --------------------------------------- Each version of the Embedded Controller Program Service Diskette contains the following embedded controller program. The version of embedded controller program can be viewd by running ThinkPad Configurator from your operating system and selecting the System Information button or by invoking IBM BIOS Setup Utility. 1. Make sure there is no diskette in the diskette drive, then turn off the computer. 2. Turn on the computer. 3. While the "To interrupt normal startup, press the blue Access IBM button" message is displayed at the lower-left of the screen, press the Access IBM button. 4. Select Start setup utility. If you have set a superviser password, the IBM BIOS Setup Utility menu appears after you type in the password. The embedded controller version is displayed on the first screen of the IBM BIOS Setup Utility. Diskette Version Embedded Controller Program Version ---------------- ----------------------------------- 1.00 1.00b (1RHT13WW) 1.02 1.02 (1RHT15WW) Trademarks ---------- * IBM and ThinkPad are trademarks of IBM Corporation in the United States. * Windows and Windows NT are trademarks of Microsoft Corporation. Other company, product, and service names may be registered trademarks, trademarks or service marks of others.