Flash BIOS update - CD-ROM ISO image version for IBM(R) IntelliStation E Pro(R) 6204 and 6214 systems for IBM(R) NetVista(R) 2292, 6343, 6349, 6350, 6790, 6791, 6792, 6793, 6794, 6795, 6823, and 6825 systems version 20KT28A README This package updates the basic input/output system (BIOS) on IBM IntelliStation E Pro(R) 6204 and 6214 systems and IBM NetVista(R) 2292, 6343, 6349, 6350, 6790, 6791, 6792, 6793, 6794, 6795, 6823, and 6825 systems. BIOS is programming that controls low-level hardware operations, including interactions with diskette drives, hard disk drives, and the keyboard. The BIOS is stored on a chip. Your computer uses flash BIOS, which can be updated through a program on a flash diskette so that you do not have to replace the BIOS chip to update the BIOS. Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS. Print this file so that you can refer to it during the installation. Important Note -------------- Installing this update involves creating a BIOS flash CD and running the flash program from the CD. You must have access to a CD-R or CD-RW drive and CD-R software which is capable of creating a CD from an ISO image. Downloading the update ---------------------- 1. Click the file link to download the file from the web page. 2. When prompted, select a drive and directory in which to save the downloaded file. Extracting the update --------------------- 1. Click Start, select Find or Search, then click Files or Folders. 2. Type 20jz28usa.exe in the search field, then click Find Now. This will locate the 20jz28usa.exe file you just downloaded. 3. Double-click the 20jz28usa.exe icon. 4. Click Next. Read the license agreement 5. Click I Agree. The installation folder should be C:\IBMTOOLS\FLASH\20JZ28US. 6. Click Finish. You will be prompted with a message stating "The specified output folder does not exist. Create it?" 7. Click Yes. You will be prompted with a message stating "The package has been delivered successfully." 8. Click OK. Create the bootable CD ---------------------- Use your CD-R software's feature for creating a CD from an ISO image; Adaptec Easy CD Creator calls this feature Create CD from CD image. Refer to the help provided with your CD-R software for further assistance. Create a CD from the CD ISO image located in your C:\IBMTOOLS\FLASH\20JZ28US folder. The filename of the ISO image is 20J928A.ISO. Installing the update --------------------- 1. Close all open applications. 2. Insert the bootable CD into your CD-ROM drive. 3. Shutdown the computer. 4. With the CD still inserted in the CD-ROM drive, power on the system. 5. When you are prompted to select a country, press the number on your keyboard which corresponds to the country in which you are using the computer. For example, press 1 for the United States. 6. Press Enter. You will be asked if you wish to update the serial number of your machine. 7. Press N. You will be asked if you wish to update the machine type/model number of your machine. 8. Press N. The Phoenix Phlash16 utility will appear onscreen. 9. Wait until you see a message stating -------------Phoenix Phlash16 Status------------- | | | Flash memory has been successfully programmed | | | | PRESS KEY TO RESTART THE SYSTEM | | If the system does not restart | | TURN THE POWER OFF, THEN ON | | | ------------------------------------------------- 10. Remove the CD from the CD-ROM drive. 11. Press Enter. Note: If your system boots back to a 1962 POST error or displays a picture of a diskette on the screen, enter the Setup utility by pressing F1 during startup and change the Startup options to include your hard disk drive. Flash Changes ------------- General Information: 20JTxxA is the flash diskette level. 20KTxxA is the binary image level. (BIOS) NOTE: All changes carry forward. That is, if a change is added in 01, it is also in 02, 03 etc. CHANGES for 20KTxxA/20JTxxA: 20KT18A/20JT18A - Initial Release 20KT19A/20JT19A - Speed-up time to resume from S3 20KT20A/20JT20A - Correct stuck key detect not working consistently - Correct Wake On Events not booting to correct devices - Don't beep if ECC/non-ECC memory are mixed 20KT21A/20JT21A - Expose the partition table of zip diskettes - Set ICH2 COPROC_ERR_EN bit - Disable USB PCI devices if Disabled in Setup - Fix problem of fans running at full speed after S3 resume 20KT22A/20JT22A - Print PreBoot Notification Text (if any) before booting. - Fix APM Bios mode by changing the Setup questions. - Fix 101 Keyboard "Problem Device" when no PS/2 devices present. - Implements Customer Data Area, 500 byte string to DMI 131 structure. 20KT23A/20JT23A - Add code to report DMI System Enclosure based on Model. - This bios will operate hard drives in UDMA 5 mode under W2K and XP. - Remove the DEVICE_DISABLED multiboot option. - Fix CD boot problem - were rejecting Data CDs that had the Copy Permitted bit turned on. NOTE: When 20KT21A or earlier is flashed over 20KT23A or later, the DMI Type 3 "Asset Tag" string will be lost, because in the earlier bios there is no place to store it. 20KT24A/20JT24A - Fix zip drive under W98 - send partition table command to drive with argument always set to "Expose" 20KT25A/20JT25A - Use a lower fan speed in Quiet mode - Reduce fan speed during POST instead of later - Removed PS/2 Keyboard/Mouse as a Low Power Entry Monitor in Setup - Correct German translation problem - Update Intel PXE code to 4.0.22 20KT26A/20JT26A - System goes into low power mode after 4 hours with power management disabled - POV Diagnostic test failing once a minute when you loop the test - Correct problem with some 16 bit PCMCIA cards attached with PCMCIA/1394 combo card 20KT27A/20JT27A - Restore fan speed on S3 resume to appropriate speed - Added type 13 SMBIOS structure - Added code to opy RFID Asset info to DMI3 Asset string 20KT28A/20JT28A: - Boots to hard drive when hard drive is not in boot sequence - Legacy devices still claiming system rescources when Legacy-free is enabled - System does not wake from PS/2 mouse (Win 2000 and XP) - Audio shows wrong status in setup system summary screen - Corrected DMI processor information Trademarks ---------- IBM and NetVista are trademarks of the IBM Corporation in the United States, other countries, or both. Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. (C) Copyright IBM Corporation 2002. All rights reserved.