Flash BIOS update - CD ISO image version for IBM NetVista 2251, 2271, 6058, 6059, 6568, 6569, 6578, 6648, 6649, 6830, 6831, 6840, 6841 systems PIKT34A README This package updates the basic input/output system (BIOS) on NetVista(R) model 2251-xxx, 2271-xxx, 6058-xxx, 6059-xxx, 6568-xxx, 6569-xxx, 6578-xxx, 6579-xxx, 6648-xxx, 6649-xxx, 6830-xxx, 6831-xxx, 6840-xxx, and 6841-xxx computers. BIOS is programming that controls low-level hardware operations, including interactions with diskette drives, hard disk drives, and the keyboard. The BIOS is stored on a chip. Your computer uses flash BIOS, which can be updated through a program on a flash diskette so that you do not have to replace the BIOS chip to update the BIOS. Note: Make note of any settings you have changed in the BIOS Configuration Utility. These settings may have to be re-entered after updating the BIOS. Print this file so that you can refer to it during the installation. Important Note -------------- Installing this update involves creating a BIOS flash CD and running the flash program from the CD. You must have access to a CD-R or CD-RW drive and CD-R software which is capable of creating a CD from an ISO image. Downloading the update ---------------------- 1. Click the file link to download the file from the web page. 2. When prompted, select a drive and directory in which to save the downloaded file. Extracting the update --------------------- 1. Click Start, select Find or Search, then click Files and Folders. 2. Insert a blank 1.44MB floppy diskette into the diskette drive. 3. Type pijz34usa.exe in the search field, Click Find Now. This will locate the pijz34usa.exe file you just downloaded. 4. Double-click the icon for pijz34usa.exe. 5. Follow the onscreen prompts. The necessary files will be extracted to your hard disk drive Create the bootable CD ---------------------- Use your CD-R software's feature for creating a CD from an ISO image; Adaptec Easy CD Creator calls this feature Create CD from CD image. Refer to the help provided with your CD-R software for further assistance. Create a CD from the CD ISO image located in your C:\IBMTOOLS\FLASH\PIJZ34USA folder. The filename of the ISO image is PICD31A.ISO. Installing the update --------------------- 1. Close all open applications. 2. Insert the bootable CD into your CD-ROM drive. 3. Shutdown the computer. 4. With the CD still inserted in the CD-ROM drive, power on the system. The following screen will appear: The boot sections of your bootable CD-ROM are: 0. DEFAULT 1. PIJ341A Please select one option, ESC to bypass Bootable CD:0 5. Press 0. 6. When you are prompted to select a country, press the number on your keyboard which corresponds to the country in which you are using the computer. For example, press 1 for the United States. 7. Press Enter. You will be prompted with the current serial number of your machine. 8. If the serial number is correct, press N. You will be prompted with the current machine type/model number of your machine. 9. If the machine type/model number is correct, press N. You will be prompted with the following message: *************************************************************** * Your system can be enabled to use enhanced security. If you * * enable enhanced security, and you lose or forget your * * administrator password, your system board will have to be * * replaced. Do you want to enable enhanced security on your * * system? (Y/N) * *************************************************************** 10. Unless you know exactly what the enhanced security features entail, press N. You will be prompted with the following message: *************************************************************** * Would you like to change the logos displayed during * * startup (Y/N) ? * *************************************************************** 11. Press N. 12. Wait until you see a message stating ****************************** * POST/BIOS update completed * ****************************** ****************************************** * Remove the diskette from the drive and * * Press Enter to restart the system. * ****************************************** 13. Remove the CD from the CD-ROM drive. 14. Press Enter. Note: If your system boots back to a 1962 POST error or displays a picture of a diskette on the screen, enter the Setup utility by pressing F1 during startup and change the Startup options to include your hard disk drive. Testing for successful installation ----------------------------------- To verify that the BIOS update was successful, do the following: 1. Click Start, select Programs, then click Access IBM. 2. Click IBM System Information. If IBM System Information is not installed on your system, install it using your Software Selections CD. 3. Verify that the BIOS version is IBM BIOS ver PIKT34.0. Flash Changes ------------- General Information: PIJTxxA is the flash diskette level. PIKTxxA is the binary image level. (BIOS) NOTE: All changes carry forward. That is, if a change is added in 01, it is also in 02, 03 etc. CHANGES for PIKTxxA/PIJTxxA: PIKT12A/PIJT12A: - Initial Release PIKT13A/PIJT13A: - Last boot device not retained when returning from S4 state - Add Sony HiFD boot support - POV card can be removed in S3 without detection - Add flash under OS support - USB keyboard does not work after bootblock recover - Load processor updates during S3 return PIKT14A/PIJT14A: - Can't bind with POV card - SMBios PCI slot data wrong - Add additional machine types - Can't flash with PIJT13A BIOS PIKT15A/PIJT15A: - Fix hang after removing battery from CMOS PIKT16A/PIJT16A: - Add processor ID 0686 patch - Correct SMBios structures - Reset RTC default values on RTC reset - Fix for ARCO Duplidisk failure PIKT17A/PIJT17A: - Flash OS improvements - Set SVID/SID for all ICH2 functions (HCT9.6 req) - With adaptec raid adapter installed, pc locks - Unable to attach to network due to Int15 C0h value returned - Correct SMBios version reported PIKT21A/PIJT21A: - Integration of BIS code - USB legacy support changes - OS Flash Update for BIS Support - Error occurs while updating PAP while using PXE on LCCM - Win2K not resuming from S3 standby with PIJT17A (caused by SSID change) PIKT22A/PIJT22A: - Enhanced Security Improvement for ACPI S3 Standby mode PIKT23A/PIJT23A: - Update the Remote Lockout Function to be compliant with the latest spec. - Update the Boot Agent Code PIKT24A/PIJT24A: - Added support for SST flash chip. - Corrected boot hang problem with certain USB devices. - Added S3 suspend state when a POV card is present. PIKT25A/PIJT25A: Not released PIKT26A/PIJT26A: Not released PIKT27A/PIJT27A: - Updated flash2.exe to allow down flashing to previous BIOS levels. - Updated the SMBIOS structures to support 1GHz processors. - Display Asset ID information in SMBIOS structure type 3. PIKT28A/PIJT28A: - Add RFID Asset number to SMBIOS structure type 3 - Add copyright statement for BIS - Allow entry to Setup on warm boot PIKT29A/PIJT29A: - Fixed incompatibilities with certain video cards. - Update the flash under operating system utility. - Corrected a modem failure with com 2. - Corrected boot screen hang which occured on some model numbers. PIKT30A/PIJT30A: - Corrected manufacturing issue with flash2.exe program. - Not released PIKT31A/PIJT31A: - Correct problem of no video w/ Matrox rev 108 AGP adapter - Increase max cpu speed the 1066 in smbios structures PIKT32A/PIJT32A: - Add processor ID 068A patch. - Upgrade bios and flash utility for 1133 MHz cpu. - Eliminate sending characters thru serial ports during POST. - Get monitor characteristics function added (when in enhanced POST" - mode only). - Fix flash utility to flash down a release level. * Important Note: Do not try to flash down to levels 30A or 31A without this flash utility fix. You will hang your system. If you must flash down, copy the flash utility (flash2.exe) from level 32A to the 30A or 31A level flash diskette. PIKT33A/PIJT33A: - Update patch file for processor 0683 - This BIOS update addresses Intel Errata G85 and E76. This Errata effects 933 MHZ / 1GHZ 'B' Stepping Level Pentium III processors, only. (i.e. A and C Stepping Levels are okay, as well as B levels at speeds lower than 933MHZ.) - This BIOS includes a patch from Intel which Intel believes prevents a potential data error problem. Although Intel states that the problem can only occur under certain limited temperature and voltage conditions, IBM strongly recommends updating your BIOS immediately. - For those customers who wish to use the new processor patch code without updating their current level of BIOS, please refer to the "README.1ST" file. PIKT34A/PIJT3A: - Fix a POV problem on return from S3 state - Can now access SETUP after warm reboot - Increased maximum speed of processor to 1 GHz in System Management Structures Trademarks ---------- IBM and NetVista are trademarks of the IBM Corporation in the United States, other countries, or both. Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. (C) Copyright IBM Corporation 2001. All rights reserved.ATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. (C) Copyright IBM Corporation 2001. All rights reserved.