TCP/IP Direct Connect for Windows NT v2.0.2 ------------ Requirements ------------ Microsoft Windows NT 4.0 with SP4 or greater Channel drivers v5.5 ------------ Discription ------------ This fix corrects a compatibility problem seen with SP6a installed, resulting in system Hangs, or blue screens. ------------ Installation ------------ Installation is accomplished using the standard Windows NT adapter installation process. I.E. Go to Network Properties, click on the "Adapters" tab, and select "Add". Use the "Have Disk" button and specify a path to the TCP/IP Direct Connect installation directory. This product requires that the Channel Drivers for Windows NT be installed. NOTE: TCP/IP Direct Connect "Emulation Type" Changes for ESCON. Please note TCP/IP Direct Connect has changed the required "Emulation Type" within the ESCON configuration. It now requires that the "MPC" emulation type be used, not "Gen" (Generic). ------ Update ------ If you are currently running TCP/IP Direct Connect v2.0, you can upgrade to this version by selecting the "Update" button from the Network Properties dialog box. Versions of TCP/IP Direct Connect prior to v2.0 can not be upgraded. If you are running a version older than v2.0, you must uninstall the old version and then install this version. NOTE: Remember to record the Direct Connect configuration settings before removal, otherwise these settings will be lost. See the Installation Guide for more details.