Keylock Login V1.0.0.18 Upgrade Instructions NOTE: You can use Keylock Login V1.0.0.18 directly if you haven't use a previous version of Keylock Login* with your memory key, but if you've used a previous version Keylock Login* please follow the following instruction to upgrade to Keylock login V1.0.0.18. - Procedure : 1. Before performing the update, please make sure you have downloaded Keylock Login V1.0.0.18 and Keylock User Setup V1.0.0.6. 2. Login to the Secure Area of the memory key with the previous version Keylock Login*. 3. Backup any data in the Secure Area to your computer hard disk. 4. Set the Secure Area size to "0" with the previous version of Keylock Login*. 5. Replace the previous version of Keylock login* on the memory key with Keylock Login V1.0.0.18. 6. Unplug the memory key. 7. Run Keylock User Setup V1.0.0.6. by double-clicking on the file. 8. If The "Install" button is highlighted now, please skip to step 11. 9. Select "Uninstall" to remove the previous version Keylock User setup**, and reboot the computer. 10. After reboot, re-insert memory key into the computer and run Keylock User Setup V1.0.0.6 again. 11. Select "Install" to install the new version Keylock Login, and reboot the computer. 12. Upgrade complete. Remark : * - previous version Keylock Login includes V1.0.0.13 / V1.0.0.15 / V1.0.0.16 / V1.0.0.17 ** - previous version Keylock User Setup includes V1.0.0.2 / V1.0.0.5