SDLT_V86.exe 05/18/2005 1.0 Overveiw The SDLT_V86.exe file is a Microsoft Windows based self-extracting WinZip executable program that will automatically bring up a menu of selections to : 1: update the Firmware 2: Run WinDLT.exe Diagnostics 3: SCSI Inquiry 4: Enter Serial Number of tape backup unit 5: Exit program. The file was built to be fully automated and will take effect immediately upon completion of the tape backup units reset after the firmware has been applied. 2.0 Change History 1) Fixed a bug check condition that will eliminate the most common cause of dropped leaders in drives. 2) Improved read margins. 3) Other code fixes for bug checks, and other observed issues such as failed rewind commands, invalid media reported, and selection timeouts. Note: Because of the many significant improvements in reliability IBM stongly recommends this firmware update. 3.0 Installation and Setup Instructions This file is a self-extracting WinZip executable file that will self extract to the systems dedicated temporary directory and run via a batch file. A self-test and bus reset are performed at the end of the update and the device will then be again ready for use. 4.0 Web Sites and Support Phone Numbers IBM PC Support Web Site: http://www.pc.ibm.com/support 5.0 Disclaimer This document is provided “as is” without warranty of any kind. IBM disclaims all warranties, whether express or implied, including without limitation, the implied warranties of fitness for a particular purpose and merchantability with respect to the information in this document. By furnishing this document, IBM grants no licenses to any patents or copyrights.