IBM IntelliStation A10 Flash Update Version 1.47 - Build PNE147A Change History Version 1.47 - BuildID: PNE147AUS ----------------------------------------- Problem(s) Fixed: - Lost timer tick issus: The root cause of the problem is that the low/high trip limits for the voltages monitor are too close to the nominal voltages. When an SMI runs on the system CPU, all other processes stop. Enhancements: Limitations: Dependencies: Version 1.46 - BuildID: PNE146AUS ----------------------------------------- Problem(s) Fixed: - False 201 memory POST error in certain instances. Enhancements: Limitations: Dependencies: Version 1.45 - BuildID: PNE145AUS ----------------------------------------- Problem(s) Fixed: - Random POST errors 161 and 184 in certain instances. Enhancements: Limitations: Dependencies: Version 1.44 - BuildID: PNE144AUS ----------------------------------------- Problem(s) Fixed: Enhancements: - Update SiI 3512 SATA BIOS to V4.5.534. Limitations: Dependencies: Version 1.43 - BuildID: PNE143AUS ----------------------------------------- Problem(s) Fixed: - Battery may drain more quickly than normal in rare instance. - Rear fans may fail when system does soft-off. Enhancements: Limitations: Dependencies: Version 1.42 - BuildID: PNE142AUS ----------------------------------------- Problem(s) Fixed: - Matrox FX card not visible from device manager. - Disable nonECC function in setup (no longer supported). - System does not boot from legacy floppy when diskette is the only option in the boot sequence. Enhancements: - Changes for C0/CG mixed stepping support. - Enable HostRAID and change SCSI HostRAID OPROM to 4.30.09. Limitations: Dependencies: Version 1.41 - BuildID: PNE141AUS ---------------------------------------- Problem(s) Fixed: - XP HCT 11.2 - BIOS failed to resume from standby. Enhancements: Limitations: Dependencies: Version 1.40 - BuildID: PNE140AUS ---------------------------------------- Problem(s) Fixed: - XP HCT 11.2 - 6M will not wake up from ACPI S1. - Corrected the PXE information in Boot menu. - Will not boot through 1962 Post Error. - 0 Memory Size in SMBIOS on Single Processor models. Enhancements: Limitations: Dependencies: Version 1.39 - BuildID: PNE139AUS ---------------------------------------- Problem(s) Fixed: - Modify DMI table Type 4 Processor Information. - SATA /SCSI Presence not listed in System Summary. - Rear fan1 LED always lights on some system. - RHEL WS 3 Update 3 for AMD64/EM64T does not install. - Wildhorse:Bios37:XPSP2:2x2.4GHz:Audio Yellow Banged in Device Manager. - Bad dimm function fails. - Fix text for "Backup BIOS function". - System hand at audio module during PLaction. - System hand at video module durning PLaction. - Diagnostic fails with data miscompare. - Corrected the supported OS list within "Installed O/S". Enhancements: Limitations: Dependencies: Version 1.38 - BuildID: PNE138AUS ---------------------------------------- Problem(s) Fixed: - Speaker too loud. - Some kinds of USB keyboards affect the Boot Block function. - BIOS 28,29A: IRQ 5 in was conflict state for Parallel Port. - System hang CKPT 28 after windows reboot test several times. - Fix text for "Backup BIOS function". - Invalid text while backing up bios with update. - Screen stops at POST error log after HW monitor event happens. - Flashing BIOS 37A with USB FDD will fail. - BIOS 37 fails to enter BIOS utility and boot meun. - Disabled HostRAID option in the Setup Menu. - BIOS 37 boot block diskette make from PNM037A.IMG doesn't work. Enhancements: - Implemented 8131 Errata #56. - BIOS Changes Required for C0/CG Mixed Stepping Support. Limitations: Dependencies: Version 1.37 - BuildID: PNE137AUS ---------------------------------------- Problem(s) Fixed: - WHQL Int 13H Extensions Failure(SATA HostRAID). - Error message within PCDR utility\Hardware Info.\IRQ and DMA. - Multi-bit error can't be detected on AP. - Screen stops at POST error log after HW monitor event happens. Enhancements: Limitations: Dependencies: Version 1.36 - BuildID: PNE136AUS ---------------------------------------- Problem(s) Fixed: - HCT11.2/Unreported Memory and I/O Port testing fail. - No 'System Board Ethernet PXE/DHCP' in 'Devices and I/O Ports'. - Memory size information didn't exclude the 4GB Memory Hole size. - 2 minor defects for Phlash16 utility. - IOS UI become disordered after some operation steps. - Invalid text while backing up bios with update. - Boot Sequence defects (2 FDD Drives connect to the system). - Suggestion: to inverse the event log displaying sequence. - One graphic page happened if we exit "POST Startup Error" page. - Bios34:XPSP2:2x2.4GHz:Unreported Memory DWORD Failure. - CM_PROB_FAILED_POST_START on install of HCT 11.2. - Checking H/W info. within Diagnostic tool will hanged in 35A. - Flash problems. Enhancements: Limitations: Dependencies: Version 1.35 - BuildID: PNE135AUS ---------------------------------------- Problem(s) Fixed: - F12 hotkey function in BIOS Event page. - The Parallel Port resource in Windows isn't consistant to BIOS. - CPU information abnormal in IBM logo page (POST). - BIOS 33A: System boot from PXE instead of Primary Start sequence or Alternal Start Sequence. - After WOL ,system can't boot to onboard LAN PXE. - Disable of SCSI disables SATA HostRAID. - Correct bios help screens. - Machine check error test. Enhancements: - Update SATA HostRAID to level 2109. - Update USB code for number lock issue Limitations: Dependencies: Version 1.34 - BuildID: PNE134AUS ---------------------------------------- Problem(s) Fixed: - Optical drives seen as CD-ROM - Lockout on CPU1 - Threshold function - BSOD set master/slave issue Enhancements: Limitations: Dependencies: Version 1.33 - BuildID: PNE133AUS ---------------------------------------- Problem(s) Fixed: - Implement mixed revision processor support. - Engish language supported only. - Fixed issue where System reboots if the power button is pressed in BIOS utility page. - HostRAID Select Option Enable. Enhancements: Limitations: Dependencies: Version 1.32 - BuildID: PNE132AUS ---------------------------------------- Problem(s) Fixed: - 1807 post error with ServerRAID-6i problem. - Light all fan LED's when system temp is over. - Resolve memory issue when only 3GB is recognized even if system has 4GB memory. Enhancements: Limitations: Dependencies: Version 1.31 - BuildID: PNE131AUS ---------------------------------------- Problem(s) Fixed: - HDD Boot Order Setting Preserved on FLASH Upgrade. Enhancements: Limitations: Dependencies: Version 1.30 - BuildID: PNE130AUS ---------------------------------------- Problem(s) Fixed: - System may not restart after single bit error. - System may boot wrong drive after WOL. Enhancements: - Updated CPU microcode. Limitations: Dependencies: Version 1.26 - BuildID: PNE126AUS ---------------------------------------- Problem(s) Fixed: Enhancements: - Initial BIOS Release Limitations: Dependencies: