Record number: H132166 Device: D/T6571 Model: M Hit count: UHC00000 Success count: USC0000 Publication code: PC50 Tip key: 003 Date created: O96/01/11 Date last altered: A96/01/11 Owning B.U.: USA Abstract: PC300 486 Jumper Corrections TEXT: Below are items that have been reported to IBM as errors and/or missing information in the area of PC 300 (486) jumpering and configuration. This tip will be periodically updated with additional information as required. ================================================================ IBM PC 300 486 based systems may contain a label on the underside of the top cover assembly that shows incorrect PCI/VL-Bus jumper settings. The correct positions for the PCI/VL-Bus jumper are documented in the May 1995 300/700 Series HMM on page 100 and illustrated below: Selection | JP3 | JP4 | JP13 | JP7 | ----------+--------+--------+---------+--------+ VESA | 1-2 | 1-2 | Open | Open | Local | | | | | Bus | | | | | ----------+--------+--------+---------+--------+ PCI | 2-3 | 2-3 | Close | Close | BUS | | | | | ----------+--------+--------+---------+--------+ ================================================================ PROCESSOR SPEED jumpers or CPU SPEED SELECTION jumpers: Some earlier field documentation was misleading or incorrect when addressing the CPU Speed Selection jumpers. The chart below illustrates the correct orientation of the jumpers depending on the processor installed. Speed | J35 ! J36 ! J37 | ----------+--------+--------+---------+ 20Mhz | ON | OFF | OFF | --------------------------------------| 25Mhz (D) | OFF | ON | ON | ----------+--------+--------+---------| 33Mhz | OFF | ON | OFF | --------------------------------------| 40Mhz | OFF | OFF | ON | ----------+--------+--------+---------| 50Mhz | OFF | OFF | OFF | --------------------------------------+ NOTE - Incorrect placement of the speed selection jumper may cause system failures and an incorrect Processor Speed designation in the systems Setup Utility. Always check the jumper settings on replacement system board FRU's to match the processor installed. The default setting for replacement boards is the 25Mhz setting. ================================================================ SAS KEYWORDS: PSY2 PSVP PSY2PART PSVPPART IBMPC PC300 PC 330 PC350 6571 6573 6581 6583 D/T6571 D/T6573 D/T6581 D/T6583 PSVPERR PSY2ERR PSVPBRD PSY2BRD