H132817 - Incorrect Information Displayed by IBM DMI Browser SYMPTOM: IBM PC 700 Series 6877 and 6887 Series systems may display incorrect information when using the IBM DMI (Desktop Management Interface) Browser from the OS/2 Desktop. PROBLEM ISOLATION AIDS: The IBM DMI Browser is used to interrogate the system for specific hardware and microcode level information. Use the following procedure to determine if the level of IBM DMI browser installed is affected: A) From the OS/2 Desktop select "IBM DMI." B) Select the "DMI MIF Browser." C) Click on the "+" sign next to "PC System MIF." D) Double click on the Component ID - the incorrect serial number will be displayed. E) Double click on System BIOS - the incorrect level is shown. Incorrect information may also be received from the following categories: Physical Memory System Enclosure Logical Drive System Cache System Slots Mouse Parallel Port Video Keyboard Serial Port Disk IRQ 15 Partition FIX: To verify system information, press F1 during the memory count to access the Configuration/Setup Utility. IBM Advanced Diagnostics (QAPlus/Pro) and the System Information Tool located on the OS/2 Desktop may also be used to view and verify system information. The next release of the IBM DMI Browser will be updated to eliminate this problem. Contact the IBM PC Company Helpcenter for information regarding updates to preloaded software. QAPlus/Pro is a trademark of DiagSoft, Inc.