H133588 - ATI Video Driver Installation Fails in OS/2 WARP                   
                                                                                
                                                                                
                                                                                
 SYMPTOM:                                                                       
 The video device driver for the ATI MACH32 ISA Video Adapter                   
 may fail to load in OS/2 WARP on a PC 300 or 700 Series system.                
                                                                                
 PROBLEM ISOLATION AIDS:                                                        
 The ATI MACH32 ISA Video adapter is configured to use                          
 I/O address 2E8 which conflicts with the I/O address for COM4.                 
                                                                                
 FIX:                                                                           
 Modify the OS/2 WARP CONFIG.SYS file as indicated below:                       
                                                                                
 Change "DEVICE=C:\OS2\BOOT\COM.SYS"                                            
                   to                                                           
        "DEVICE=C:\OS2\BOOT\COM.SYS (1,3F8,4) (2,2F8,3)"                        
                                                                                
 REM out "DEVICE=C:\OS2\MDOS\VCOM.SYS"                                          
                                                                                
 If the error persists, continue normal problem determination                   
 procedures.                                                                    
                                                                                
 ATI MACH32 is a trademark of ATI Technologies Inc.