Record number:       H163815
   Device:              D/T6898
   Model:               M
   Hit count:           UHC00029
   Success count:       USC0000
   Publication code:    PC50
   Tip key:
   Date created:        O98/06/01
   Date last altered:   A98/06/15
   Owning B.U.:         USA

 Abstract:  SCSI BIOS ERROR: "SCSI TERMINATION NOT FOUND"


 SYMPTOM:
 When booting the system, the SCSI BIOS returns the following,
 or similar error message:

   "SCSI Termination Not Found"

 The SCSI subsystem will not be enabled.

 PROBLEM ISOLATION AIDS:
 This tip applies to IBM IntelliStation M-Pro Series 6898 and
 Netfinity 3500 Series 8644 systems.

 The "SCSI Termination Not Found" error message will manifest
 itself as an "out-of-box" error in new systems preconfigured
 for SCSI operation.

 In systems preconfigured for IDE operation, the SCSI error
 message may not be seen until the on-board SCSI BIOS is
 enabled in the F1 Setup utility, and a SCSI hardfile is in-
 stalled.

 Planar FRU numbers exposed to this condition are P/N93H7269
 and P/N08L0046 (for 333MHz Models).

 FIX:
 Follow normal problem determination steps to eliminate possible
 SCSI adapter, SCSI cable, or SCSI hardfile errors.

 If the "SCSI Termination Not Found" error persists, replace
 the system board with FRU P/N08L0606.

 Note: When servicing Netfinity 3500, Type 8644-1xx/2xx systems,
       see Retain Tip H106654 for instructions on planar
       replacement, and saving the CMOS configuration.

 SAS KEYWORDS:
    PSY2               PSY2ERR            PWS                PWSERR
    D/T6898            6898               NETFINITY 3500     8644
    UNCLASSIFIED       93H7269            08L0606            RF1
    FUSE